Fill in your answers below
A single strand slab caster at steel melt shops casts slabs. Liquid steel is produced through electric arc furnace (EAF)-AOD Convertor/VOD-ladle refining furnace route.
Hisar
Product | Max Width | Thickness |
---|---|---|
Slab | 1275 | 200 |
Blooms are cast from twin stand bloom caster at steel melt shops. Liquid steel is produced through electric arc furnace-AOD convertor/VOD-ladle refining furnace route.
Size: 160 mm sq.
200 mm sq.
260 x 200 mm
HR Black : As cast/ground slabs are first heated and soaked in reheating furnace, they are rolled to intermediate thickness in the roughing mill, and then to the final thickness in the steckel mill.
HRAP : Hot rolled coils are annealed and pickled in continuous annealing-pickling lines having scale breaker, shot blasting unit, electrolytic sulphuric acid, and mixed acid bath. HRAP coils have a cleaner surface and have improved mechanical properties for downstream processing.
Hisar
Product | Max Width | Thickness | |
---|---|---|---|
Min | Max | ||
Hot Rolled Coil | 1270 | 2.0 * | 12.0 |
HRAP Coil | 1270 | 2.5 * | 8.0 |
Our cold rolling facility is equipped with all state-of-the-art facilities like 20-Hi-Sendzimier cold rolling mill with IMR shifting, mill tilting, and shape meter advantages for higher degree of shape and profile correction. The CR annealing and pickling line is run using environment friendly LPG fuel with better and fastest temperature control associated with electrolytic and acid pickling, aided with very high control of pickling process. The online skin pass and tension leveling has made this line capable of producing finished 2B/2D product at par with international quality standards. The on-line automatic surface inspection system also provides a very high resolution surface quality. There is provision of offline Skin Pass Mills which helps cater to high luster requirements as well. Other facilities include bright annealing units in cracked ammonia atmosphere and strip grinding line to produce desired surface finishes.
Hisar
Product | Max Width | Thickness | |
---|---|---|---|
Min | Max | ||
CRAP Coil | 1000 | 0.5 | 3.15 |
1250 | 0.5 | 3.15 |
* Lower Thickness is available on request.
No. 1 finish plates are produced after annealing and pickling or by cutting hot rolled annealed pickled coils to desired lengths.
Hisar
Product | Max Width | Thickness | |
---|---|---|---|
Min | Max | ||
Plates | 1250 | 6.0 | 80 |
Jindal Stainless has been supplying stainless steel coins blanks to the Indian and international mints for making coins. The Company has the capability to produce high quality stainless steel and non-ferrous coin blanks. The present installed capacity for coin blanking is 10,000 metric tonnes per annum.
Jindal Stainless is equipped to develop stainless steel precision strips with thickness as minimum as 0.05 mm. These strips are input material for industries like automotives, electronics and telecommunication, health and hygiene, consumer durables, petrochemical industry, etc.
The customized chemical composition, desired mechanical properties, and precise dimensional and shape tolerances make Jindal Stainless’ precision strips unique.
Razor blade cold rolled strips of up to 0.076 mm thickness are produced in Company’s Special Products Division (SPD) at Hisar and are supplied to leading Indian and international razor blade manufacturers.
The following data sheets can be used as a reference for a better understanding of different stainless steel grades and product information:
200 series of Stainless Steel products
300 series of Stainless Steel products
400 series of Stainless Steel products
Duplex grade of Stainless Steel
Jindal Stainless is a name synonymous with unparalleled quality assurance for stainless steel flat products across all grades. Take a look at our various stainless steel grades, sizes, and finishes.
ISO 9001:2015 - Quality Management System
AD 2000-Merkblatt W0 - Pressure Equipment Certification(EU)
ISO/IEC 17025:2017 - Chemical Lab accreditation in accordance with ISO/IEC by NABL
PED/97/23/EC - Pressure Equipment Directive(EU)
1Marine - Approved Manufacturer of Steel Plates, Strip, Sections & Bars